Electro Voice EVI-15 WH

Electro Voice EVI-15 WH

Electro Voice EVI-15 WH Description:

Electrovoice Loudspeaker - EVI-15-WH Full Range 15-Inch, 8 Ohms, 250-Watts, 1-Inch Exit Titanium Compression Driver, Terminal Strip Inputs for Secure Lead Connections, 2-Way System - Available in White.

The Electro-Voice EVI-15 loudspeaker is a factory assembled system featuring a small-format Vari Intense® horn and a 15-inch direct radiator in a vented enclosure. The EVI-15 is intended to be used as a standalone full-range system, but may also be used as the mid-bass/high frequency component in most multi-way loudspeaker systems. The EVI-15 consists of a proprietary castframe 381-mm (15-in.) high power, longexcursion low-frequency driver mounted within a vented chamber of 3.4 cubic feet, optimally tuned to provide unequalized lowfrequency response to below 50 Hz. The high-frequency complement consists of a 25.4-mm (1.0-in.) exit compression driver utilizing a new small format Vari Intense® horn. Vari Intense® is a revolutionary patented6 technology that throws a 6 to 10-dB hotter signal to the back of the room. This compensates for the drop in SPL over the longer distance to the back of the room (25 feet for the short throw and about 70 feet for the long throw in a typical room). The system is provided with a 2,000-Hz passive crossover featuring self setting tweeter protection and asymetric acoustic slopes with passive lobe steering for uniform coverage throughout the crossover region. The enclosure is constructed from 19-mm (0.75-in.) thick, thoroughly braced 7-ply birch plywood lined with soundabsorbent glass wool. Five 3/8-16 shoulderbolt hanging points are provided for safe suspension of the EVI-15. There are two hanging options recommended. The optional UBracket hanging kit, MB-EVI15 is available for use with the 3/8-16 T nut locations on the side of the enclosure along with a single pullup strap located on the lower back of the enclosure. The second option is available using the two T-nut locations on the front top of the enclosure as well as the pull-up location on the lower back of the enclosure. The EVI-15 Vari Intense® loudspeaker is the ideal system whenever highoutput full-frequency-range is required.

Electro Voice EVI-15 WH Features:

• Ground-breaking advance in singlebox utility.
• New small-format Vari Intense® 6 horn.
• 1-inch exit titanium compression driver.
• 15-inch cast-frame woofer.
• 1,000-watt peak, 250-watt long-term power capacity.
• Terminal strip inputs for secure lead connections.
• Compact, lightweight, refinishable, easy-to-install enclosure.
• Three-point hanging system with optional U-bracket.
• Available in white or black finish.

Electro Voice EVI-15 WH Specifications:

• Versions: Available EVI-15 black, EVI-15 white
• System Type: Direct-radiating vented-bass fullrange loudspeaker system
• Frequency Response: 50 Hz - 20 kHz
• Power Handling: 250 watts, long-term continuous 1,000 watts, peak power
• Maximum Output: 123 dB SPL, long-term continuous 128 dB SPL, peak power
• Impedance: 8.0 ohms nominal 5.9 ohms minimum (15.8 kHz)
• Components: High-efficiency, high power castframe 381-mm (15-inch) woofer
• Input Terminals: Large screw terminals
• Replacement LF: 1815-0992
• Replacement HF: 833-0990
• Enclosure: Direct-radiating vented LF, built of 19-mm (0.75-inch), 7 ply birch plywood
• Finish: Black or white textured paint with black or white 16-gauge powder-coated grille
• Accessories: Electro-Voice MB-EVI15 U-Bracket suspension kit, Electro-Voice EBK-1 Eyebolt suspension kit
• Net Weight: 24.0 kg (53 lb)
• Shipping Weight: 28.2 kg (62 lb)
• Dimensions: (W x H x D) 429 mm (16.9 in) x 584 mm (23.0 in) x 766 mm (30.2 in)

Get your Electro Voice EVI-15 WH today!