Rane RPM Programmable Multiprocessor
The RPM Programmable Multiprocessor is a 100% drag and drop configurable DSP-based device, set up and controlled using Rane's Drag Net software. Industry standard 10Base-T Ethernet is used to communicate between Drag Net devices and any Ethernet-equipped PC running Microsoft Windows.
Multiple units are controlled from a single computer using low-cost Ethernet switches. The recessed Default button on the rear panel recalls Preset 1 in case of communications failure. The front panel has three-color LED meters for each input and output, allowing fast and intuitive signal flow verification without a computer. Control Port, Power, Ethernet and Status indicators are also on the front panel. Powered from an internal power supply and certified as UL, CSA and CE complient, the RPM programmable multiproccesor is compatible with any installation mandating agency compliance.
| Model | Analog Inputs | Analog Outputs | AES3 Input | AES3 Output | Total Inputs | Total Outputs |
| RPM 2 | 2 | 2 | 0 | 0 | 2 | 2 |
| RPM 2m | 2 | 2 | no | yes | 2 | 4 |
| RPM 26z | 2 | 6 | yes | no | 4 | 6 |
| RPM 22 | 2 | 2 | yes | yes | 4 | 4 |
| RPM 44 | 4 | 4 | yes | yes | 6 | 6 |
| RPM 88 | 8 | 8 | yes | yes | 10 | 10 |
