EAW KF730P

EAW KF730P

EAW KF730P Description:

The KF730P Series is a compact, fixed installation, line array system that sets a performance benchmark above similar systems. It delivers 3-way, KF Series performance in a flexible, easy-to-use system that can deliver concert-level output in an exceptionally wide range of venues.

The KF730P is an excellent solution for fixed installation applications such as houses of worship, theatres, hotel ballrooms, arenas, and concert halls.

The system is also ideal for supplemental coverage for larger line arrays, such as the KF760 Series. Such uses include audience side fill, delayed arrays for balconies, and stage/performer coverage.

One large MF/HF horn fills the entire face of the enclosure, better maintaining horizontal pattern control throughout the MF/HF passband. The curved aperture MF loading slots effectively move the MF acoustic origin further into the horn than physical space permits.

The side-mounted LF drivers provide a forward-firing, figure eight type pattern. The drivers are spaced so that the LF beamwidth matches the MF through crossover. The KF730P input features barrier strip terminals.

A separate terminal strip is provided for loop-through connection for daisy-chaining additional KF730Ps. The KF730P is configured using the included KF730P Splay Angle Brackets to bolt the enclosures together. This rigging system is fully compatible with the companion SB730P subwoofer. Six year warranty.

EAW KF730P Black Features:

• Highest output to size ratio for small format line arrays
• Large MF/HF horn and Phase Aligned™LF drivers for
• exceptional 110° horizontal pattern to 160 Hz
• KF730 Wizard auto-designs flown and ground-stacked arrays
• Included Splay Brackets fix the splay angles between enclosures
• 16 ohm inputs allow powering 8 KF730s with 2 amplifier channels

EAW KF730P Specifications:

CONFIGURATION

Subsystem

• Transducer Loading
• LF 2x 10 in cone Phase Aligned™
• MF 2x 7 in cone Horn-loaded
• HF 2x 1 in exit, 1.75 in voice Horn-loaded
• coil neodymium
• compression driver
• Operating Mode
• Amplifier Channels External Signal Processing
• Bi-amp LF, MF/HF DSP w/2-way filters

PERFORMANCE 1

• Operating Range 80 Hz to 20 kHz
• Nominal Beamwidth
• Horz 110°
• Vert 12°
• Axial Sensitivity (whole space SPL)
• MF/HF 105 dB 230 Hz to 20 kHz
• LF 91 dB 80 Hz to 230 Hz
• Peak Sensitivity (whole space SPL)
• MF/HF 112 dB 20 Hz to 20 kHz
• LF 92 dB 20 Hz to 20 kHz
• Input Impedance (ohms)
• Nominal Minimum
• MF/HF 16 15.9 @ 680 Hz
• LF 16 15.1 @ 250 Hz
• Recommended High Pass Filter
• High Pass =>80 Hz, 24 dB/octave
• Accelerated Life Test 2
• MF/HF 75 V 350 W @ 16 ohm
• LF 106 V 700 W @ 16 ohm
• Calculated Axial Output Limit (whole space SPL)
• Average Peak
• MF/HF 130 dB 136 dB
• LF 119 dB 125 dB

Get your EAW KF730P today!