Electro Voice CPS-2T 120V
Electro Voice CPS-2T 120V Description:
The Electro-Voice CPS-2T 120V amplifier is a very high-quality power amplifier designed to elicit excellent performance from any speaker system as well as 70.7V and 100V lines. Its low distortion and substantial headroom ensure that program material will be accurately amplified. Each channel of the CPS-2T delivers more than 330-watts continuous average power into 8 ohms and 600 watts into 4 ohms. In its transformer-isolated dual mode, it can deliver more than 580 watts into 70.7 or 100-volt lines. In the bridged mode at 1 kHz, the amplifier can deliver more than 1,200 watts into 8 ohms at less than 1% THD. Both direct and transformer-isolated outputs may be used simultaneously. The power supply with its large toroidal transformer gives the amplifier impressive headroom and current-output.
Electro Voice CPS-2T 120V Specifications:
- Continuous rated power (1k Hz, THD 1%) 2 Ohm: 850 Watts
- Continuous rated power (1k Hz, THD 1%) 4 Ohm: 600 Watts
- Continuous rated power (1k Hz, THD 1%) 8 Ohm: 380 Watts
- Continuous rated power (20-20k Hz, THD<0,2%) 4 Ohm: 500 Watts
- Continuous rated power (20-20k Hz, THD<0,2%) 8 Ohm: 330 Watts
- Maximum bridged output 4 Ohm: 1700 Watts
- Maximum bridged output 8 Ohm: 1200 Watts
- Electronics Type: Amplifier
- Network: No
- Total harmonic distortion: < 0.05 %
- Intermodulation Distortion (SMTPE): < 0.08 %
- Signal-to-noise ratio (A-weighted): > 100 dB
- Input Impedance (balanced): 20 k Ohm
- Weight Net: 22.5 kg ( 49.6 lbs )
- Dimensions (HxWxD): 132.5 x 483 x 368.8 mm (5.22" x 19.02" x 14.52")
Get your Electro Voice CPS-2T 120V today!
