Crown CTS 4200AVCA

Crown CTS 4200AVCA

Crown CTS 4200AVCA Description:

The Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Power Output

• DUAL: 4 Channels Driven
• 4 Ohm (Per Channel) - 260W
• 8 Ohm (Per Channel) - 200W
• 70V (Per Channel) - 220W
• DUAL: 1 Channel Driven
• 4 Ohm (Per Channel) - 270W
• 8 Ohm (Per Channel) - 220W
• 70V (Per Channel) - 250W
• BRIDGED-MONO: 2 Channel-Pairs Driven
• 8 Ohm (Per Channel Pair) - 520W
• 16 Ohm (Per Channel Pair) - 400W
• 100V (Per Channel Pair) - 220W
• BRIDGED-MONO: 1 Channel-Pair Driven
• 8 Ohm (Per Channel Pair) - 560W
• 16 Ohm (Per Channel Pair) - 440W
• 100V (Per Channel Pair) - 250W

Crown CTS 4200AVCA Features:

• High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
• New Crown Switching Power Supply for lighter weight
• Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
• 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
• Legendary Crown class I (BCA) and AB+B output topologies offer the best in amplifier reliability
• 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems. New "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
• Comprehensive array of indicators provide accurate diagnostics
• Two-channel models are fully PIP2-compatible. Multi-channel models accept new MC accessory modules

Crown CTS 4200AVCA Specifications:

• Frequency Response (at 1 watt, 20Hz - 20 kHz): ± 0.5 dB
• Phase Response (at 1 watt, 10Hz - 20 kHz): ± 35°
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): 100 dB un-weighted
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz: <0.05% (typical)
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from 163 milliwatts to full bandwidth power: <0.05%
• Damping Factor 10 Hz to 400 Hz: >180
• Crosstalk (below rated power, 20 Hz to 1 kHz): >80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): >50 dB
• DC Output Offset (Shorted input): <5 mV
• Input Impedance nominally balanced, nominally unbalanced: 20 k ohms, 10 k ohms
• Maximum Input Level (before input compression): +20 dBu
• Load Impedance (Note: Safe with all types of loads)
• Stereo: 2, 4, 8 and 25 ohms (70V)
• Bridge Mono: 4, 8, 16 and 50 ohms (100V)
• Voltage Gain (at maximum level setting), 1.4V sensitivity
• 4/8 Ohm Operation: 20:1 (26 dB)
• 70V Operation: 50:1 (34 dB)
• 100V Operation: 71.4:1 (37 dB)
• Required AC Mains: 120V 60 Hz, 220/230/240V/50 Hz
• Power Draw at Idle (120VAC mains)
• All channels in 4/8 ohm mode: 70W
• Cooling: Variable-speed, forced air
• Dimensions
• Width, 19 in. (48.3 cm.)
• Height, 3.5 in. (8.9 cm.)
• Depth, 16.25 in. (41.3 cm.)
• Net Weight, 27 lb, 8 oz (12.5 kg)

Get your Crown CTS 4200AVCA product today!