Crown CM700

Crown CM700

Crown CM700 Description:

Cardioid condenser mic for use in professional recording and stage applications. Handles up to 151dB SPL before overload and is an excellent choice for overhead miking of drums and for acoustic instruments. Also features a 3-position roll-off switch.

Crown CM700 Features:

• Electret condenser microphone
• 30Hz to 20kHz frequency response
• Cardioid polar pattern
• 190ohms impedance
• 2.5mV/Pa sensitivity
• Great for drums

Crown CM700 Specifications:

• Type: Cardioid condenser.
• Transducer: Back electret condenser.
• Frequency response (typical): 30 Hz to 20,000 Hz
• Polar pattern: Cardioid
• Impedance: 190 ohms, balanced. Recommended minimum load impedance 1000 ohms.
• Open-circuit sensitivity: 2.5 mV/Pa* (-52 dB re 1 V/Pa*).
• Power sensitivity: -52 dB re 1 mW/Pa*.
• Equivalent noise level (self-noise): 21 dB SPL typical A-weighted (0 dB=.0002 dyne/cm2).
• S/N ratio: 73 dB at 94 dB SPL.
• Maximum SPL for 3% THD: 151 dB with 48V phantom, 142 dB with 12V phantom.
• Polarity: Positive pressure on the diaphragm produces a positive voltage on pin 2 with respect to pin 3 of the output connector.
• Output connector: 3-pin male XLR-type connector.
• Switch: Flat, low-cut and bass rolloff.
• Operating voltage: Phantom power, 12 to 48 volts
• DC, positive voltage on pins 2 and 3 with respect to pin 1 of output connector.
• Current drain: 3.2 mA.
• Materials: Rugged steel housing and steel mesh grille.
• Finish: Satin black.
• Dimensions:
• Weight: 4 oz. (113 grams).
• Cable: None supplied. Use 2-conductor shielded mic cable.
• Included accessories: Carrying pouch, WS-12 foam
• pop filter, WS-11 foam windscreen, ASA-4 swivel mount.
• Optional accessories: Crown PH-4B phantom power supply (4 channels, AC powered). Crown PH-1A phantom power supply (1 channel, battery or AC powered). CM-SM isolation shock mount, CM-SB stereo bar.

Get your Crown CM700 today!