Audio Technica AT4033/CL

Audio Technica AT4033/CL

Audio Technica AT4033/CL Description:

Transformerless circuitry virtually eliminates low-frequency distortion and enhances capture of high-speed transients. An 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Requires 48V phantom power.

Audio Technica AT4033/CL Features:

• Cardioid pattern
• Frequency response 30-20,000Hz
• Low frequency roll-off: 80Hz, 12dB/octave
• Maximum input sound level: 145dB SPL, 1kHz @1% distortion; 155dB SPL, with 10dB pad (nominal)
• Noise 17dB SPL
• Dynamic range (typical) 128dB, 1kHz at max SPL
• S/N ratio 77dB

Audio Technica AT4033/CL Specifications:

• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 30-20,000 Hz
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
• IMPEDANCE 100 ohms
• MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.;
• 155 dB SPL, with 10 dB pad (nominal)
• NOISE 17 dB SPL
• DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 77 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
• SWITCHES Flat, roll-off;
• 10 dB pad (nominal)
• WEIGHT 13.4 oz (380 g)
• DIMENSIONS 6.69" (170.0 mm) long,
• 2.10" (53.4 mm) maximum body diameter
• OUTPUT CONNECTOR Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective
• carrying case
• AUDIO-TECHNICA CASE STYLE R1

Get your Audio Technica AT4033/CL today!