Audio Technica AT3031
Audio Technica AT3031 Description:
The studio-quality AT3031, a low-profile cardioid condenser microphone from Audio-Technica's renowned 30 Series, is known for a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer.
It has a high maximum SPL and wide dynamic range, low self noise, and is perfectly suited for today's most sophisticated digital recording equipment. Flat, extended frequency response. Lo-cut switch and 10dB pad.
Audio Technica AT3031 Features:
- High max SPLs
- Wide dynamic range
- Low self noise
- Flat extended frequency response
- Lo-cut switch and 10dB pad
- Perfectly suited for today's most sophisticated digital recording equipment
Audio Technica AT3031 Specifications:
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE 250 ohms
- MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.;
- 158 dB SPL, with 10 dB pad (nominal)
- NOISE 16 dB SPL
- DYNAMIC RANGE (typical) 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 78 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
- SWITCHES Flat, roll-off;
- 10 dB pad (nominal)
- WEIGHT 4.0 oz (112 g)
- DIMENSIONS 5.67" (144.0 mm) long,
- 0.83" (21.0 mm) maximum body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
- AUDIO-TECHNICA CASE STYLE S1
Get your Audio Technica AT3031 today!
